Call Us Call
Back
Book
Lesson

Show Me Tell Me Questions

Official DVSA guide to what happens during the driving test and what it takes to pass the ‘show me, tell me’ questions.

Click here to download in Word format.

“Show me” questions on the move:

  1. When it’s safe to do so, can you show me how you wash and clean the rear windscreen?
  2. When it’s safe to do so, can you show me how you wash and clean the front windscreen?
  3. When it’s safe to do so, can you show me how you’d switch on your dipped headlights?
  4. When it’s safe to do so, can you show me how you’d set the rear demister?
  5. When it’s safe to do so, can you show me how you’d operate the horn?
  6. When it’s safe to do so, can you show me how you’d demist the front windscreen?
  7. When it’s safe to do so, can you show me how you’d open and close the side window?

Tell Me Questions:

1. Tell me how you’d check that the brakes are working before starting a journey.

Brakes should not feel spongy or slack. Brakes should be tested as you set off. Vehicle should not pull to one side.

2. Tell me where you’d find the information for the recommended tyre pressures for this car and how tyre pressures should be checked.

Manufacturer’s guide, use a reliable pressure gauge, check and adjust pressures when tyres are cold, don’t forget spare tyre, remember to refit valve caps.

3. Tell me how you make sure your head restraint is correctly adjusted so it provides the best protection in the event of a crash.

The head restraint should be adjusted so the rigid part of the head restraint is at least as high as the eye or top of the ears, and as close to the back of the head as is comfortable. Note: Some restraints might not be adjustable.

4. Tell me how you’d check the tyres to ensure that they have sufficient tread depth and that their general condition is safe to use on the road.

No cuts and bulges, 1.6mm of tread depth across the central three-quarters of the breadth of the tyre, and around the entire outer circumference of the tyre.

5. Tell me how you’d check that the headlights and tail lights are working. You don’t need to exit the vehicle.

Explain you’d operate the switch (turn on ignition if necessary), then walk round vehicle (as this is a ‘tell me’ question, you don’t need to physically check the lights).

6. Tell me how you’d know if there was a problem with your anti-lock braking system.

Warning light should illuminate if there is a fault with the anti-lock braking system.

7. Tell me how you’d check the direction indicators are working. You don’t need to exit the vehicle.

Explain you’d operate the switch (turn on ignition if necessary), and then walk round vehicle (as this is a ‘tell me’ question, you don’t need to physically check the lights).

8. Tell me how you’d check the brake lights are working on this car.

Explain you’d operate the brake pedal, make use of reflections in windows or doors, or ask someone to help.

9. Tell me how you’d check the power-assisted steering is working before starting a journey.

If the steering becomes heavy, the system may not be working properly. Before starting a journey, 2 simple checks can be made.

Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate. Alternatively turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.

10. Tell me how you’d switch on the rear fog light(s) and explain when you’d use it/them. You don’t need to exit the vehicle.

Operate switch (turn on dipped headlights and ignition if necessary). Check warning light is on. Explain use.

11. Tell me how you switch your headlight from dipped to main beam and explain how you’d know the main beam is on.

Operate switch (with ignition or engine on if necessary), check with main beam warning light.

12. Tell me how you’d check that the engine has sufficient oil.

Open the bonnet and identify the dipstick/oil level indicator, describe check of oil level against the minimum and maximum markers.

13. Tell me how you’d check that the engine has sufficient engine coolant.

Open the bonnet and identify the high and low level markings on header tank where fitted or radiator filler cap, and describe how to top up to correct level.

14. Tell me how you’d check that you have a safe level of hydraulic brake fluid.

Open the bonnet and identify the reservoir, check level against high and low markings.

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt

Start typing and press Enter to search